Epson XP-205 Scanner in Windows 8.1 – How to get it back to work

Now it’s time for a Epson XP-205 Scanner to work with Windows 8.1

It took me a while now to get the XP-205 scanner component to run on my new Windows 8.1 via WiFi:

The problem is, that when you install the scan software, you might get a communication error telling you that the scanner is probably not connected or turned off. Both of course is not the problem.

So how you get it online in Windows 8.1:

  1. First install the Epson Scan software that you can obtain directly from epson (german version link).
  2. Open the scan software and verify that you (still) get the error.
  3. epson-scan-settings-1Then change to the Windows-Tile screen (just hit the Windows-Key on your keyboard) and type “Epson Scan”. A list should appear that shows the Epson Scan entries. One of them should be “Epson Scan Settings” (german: Epson Scan-Einstellungen).
  4. Now comes the tricky part:If you work as an administrator (which you shouldn’t do usually), just open the Epson Scan Settings tool. Otherwise right-click the Epson Scan Settings tool and start it with administrator privileges. This is very important! Otherwise you won’t be able to do the next step as an important part is greyed and thus unavailable!
  5. You should see the settings window with “Connection local” selected.
  6. epson-scan-settings-2Hit the “Network” button and then hit the “add” button below the Networkscanner address field.
    If this button is disabled, you probably do not run the program with admin privileges.
  7. Add the Scanner’s IP and give it a name.
  8. Hit the Test button – it should work now!

epson-scan-settings-4The scan software should work now. I first had some issues that I also had to run it with admin privileges. Sometimes I could start the scanning software, showing the correct user interfacec but it only scanned a very tiny part of the physical scan area (VERY strange).

So if you still experience some issues: Try restarting the computer first! If this doesn’t work, try starting as administrator.

Update: The Scan software surprised me today with a message similar to  “ah no – I won’t scan today”. So I

  • uninstalled the scan software. Well I tried, the files were still in the windows directory.
  • let the Software updater update the firmware of the device
  • reinstalled Epson Scan

And – suddenly everything is just fine.

Epson Perfection 1240U mit Windows7 64bit und Windows 10

Epson stellt für den relativ alten Scanner “Epson Perfection 1240U” (aus dem Jahr 2001) keine 64bit Treiber für Windows 7 oder Windows 10 bereit.

Anstatt einen neuen Scanner zu kaufen scheint es mindestens 3 Lösungen zu geben:

Kauf zusätzlicher Software (bei Win 7)

  1. Die Empfehlung von Epson ist, die Software VueScan von Hamrick zuinstallieren. Vorteil: es geht! Nachteil: Die Software kostet ca. 30€
  2. In einem Windows 7-Forum wird ein modifizierter Treiber zum Download angeboten. Aber ehrlich gesagt habe ich Skrupel irgendwelche modifizierten Treiber aus nicht absolut vertrauenswürdigen Quellen zu installieren.
  3. Einen original Epson-Treiber eines anderen Scanners verwenden. Der Tip kommt übrigens aus dem selben Forum – da ich den Beitrag in einigen Monaten / Jahren nicht mehr wiederfinden werde, wenn ich es brauche: hier nochmal eine Beschreibung:

Epson Perfection 1240U mit Windows7 64bit:

  1. Scanner abstecken
  2. Epson Perfection 2400 Treiber für Windows 7 von Epson runterladen (EPSON Scan 3.0.4 vom 17. Juli 2009 / 20,68 MB)  Download
  3. Treiber installieren
  4. Scanner anstecken (findet keine Treiber)
  5. Start > Systemsteuerung > Gerätemanager: dort sollte jetzt ein neues Gerät mit gelbem Icon sein (der Scanner)
  6. Rechtsklick > Eigenschaften > Treiber > Treiber aktualisieren
  7. “Auf dem Computer nach Treibersoftware suchen”
  8. “Aus einer Liste von Gerätetreibern auf dem Computer Auswählen” > “Bildverarbeitungsgeräte”
  9. Hersteller: Epson, Modell: Epson Perfection 2400 auswählen und bestätigen

Mit IrvanView kann man nun scannen!

Zeitaufwand: minimal

Epson Perfection 1240U mit Windows10

Ich habe den Scanner mittlerweile entsorgt, aber er scheint auch unter Windows 10 noch seinen Dienst zu tun. Wie mir in einem Kommentar mitgeteilt wurde könnte es ungefähr wie folgt gehen:

  1. Start
  2. Einstellungen
  3. Geräte unter „Verwandte Einstellungen“ (rechts unten) „Geräte und Drucker“ auswählen.
  4. Den Scanner auswählen (Windows 10 schlägt erst mal nur vor das Gerät zu entfernen, da kein passender Treiber verfügbar ist.)
  5. Rechtsklick > Eigenschaften
  6. Hardware > Eigenschaften
  7. Einstellungen ändern > Treiber > Treiber aktualisieren.